Panasonic AG-HPD24PJ Operating Instructions - Page 26
Using the AC adaptor, Installation, Removal
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Using the AC adaptor Installation 1 Plug the AC adaptor's AC power supply cable into the adaptor, and then into a power outlet. Connect the AC power supply cable in A-B order. 2 Slide in the DC power supply cable plate until it clicks into place. Insert the plugs all the way in. A B Removal 3 Unplug the adaptor's AC power supply cable from the wall outlet. 1 POWER lamp 1 Hold the POWER button for two seconds to turn the power off, and confirm that the POWER lamp is off. 2 Press the battery lock release button and slide out the DC power supply cable plate. ◆ NOTE: • Always be sure that the unit is turned off before removing the DC cord connector plate. ◆ NOTE: • The AC Adaptor is designed to operate on world-wide mains voltages (100 to 240 V) and frequencies (50/60 Hz). However, power outlet configurations differ in different countries. Use a plug that is designed for the country of operation. If necessary, contact your supplier to obtain the appropriate plug adaptor. • When not using the unit, unplug the adaptor's AC power supply cable from the wall outlet. • The power lamp on the AC adaptor normally remains lit for a while after it is unplugged from the wall outlet. 26 Power Preparations: Using the AC adaptor