Panasonic AG-HPD24PJ Operating Instructions - Page 149
For Long and Trouble-Free Operation: Warning and Error Messages, HDMI MONI NOT ACCEPT
![]() |
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Display No Character code Description Deck operation 70 DIR NG CARD< > The directory configuration is incorrect. Immediately back up card data and format the card before using it again.( indicates the slot number where the error occurred.) Operation continues The card has been rewritten the maximum number of times. Replace the P2 card. 71 RUNDOWN CARD< > ( indicates the slot number where the error occurred.) Operation continues Displayed when the HDMI monitor cannot accept the machine's 3D output video. 60 HDMI MONI NOT ACCEPT Use an HDMI monitor that accepts 3D video, or change the machine's settings to suit the monitor's capabilities. Operation continues 62 SLAVE WARNING A problem on the slave side prevented operation. Check status on the slave side. STOP 63 SYNC POSI FAILED Failed to synchronize clip location. Check the number and type of clips. If the reference signal or input signal is corrupted during playback of a 3D clip, it may not be possible to synchronize positions on the clip. Press the STOP button to stop, check connections and input signals before restarting playback. Operation continues 64 INPUT L / R MISMATCH SDI input L/R signals and connected input connectors do not match. Check connections and input signals. Operation continues 65 REF IN NOT DETECT The reference signal could not be detected. Check connections and input signals. Recording and playback cannot be started when this message is displayed. STOP Operation continues during playback and recording 86 For Long and Trouble-Free Operation: Warning and Error Messages
![](/manual_guide/products/panasonic-aghpd24pj-operating-instructions-beba769/149.png)