Panasonic AG-HPD24PJ Operating Instructions - Page 45

Playback, Playback from the Record/Playback, Screen Thumbnail Screen Off

Page 45 highlights

Playback SDI and HDMI 3D video playback output is available only during PLAY and STILL/PAUSE. • Discrete left and right output: Special playback is only displayed on the LCD, and is not available as SDI output. However, video is available at the master unit's SDI output when the SETUP - VIDEO DISCRETE BLACK menu setting is OFF. • Single-unit left/right (side-by-side or frame packing) signal output method: The LCD monitor displays both L and R special playback images, but only the L signal is output (as both L and R images) to SDI/HDMI. Playback from the Thumbnail Screen Pressing the PLAY button starts playback from the yellow-framed clip (selected by the cursor buttons). On the thumbnail screen, clip playback can be limited and re-ordered by selecting clips or changing the display. (➝ "3D Recording/Playback Mode (3D REC/PB)" Vol. 2, page 37) ◆ NOTE: • Black numbers indicate clips available for playback. • 3D REC/PB mode does not support slot selection by the THUMBNAIL - SLOT CLIPS menu setting. 3D Signal Recording and Playback ◆ NOTE: • Clips to be played back can be from different slots in the master and slave units, but slots for left and right video must correspond. • 3D playback requires that the L (left-eye) clip be present on the master unit, and the R (right-eye) clip on the slave. Playback from the Record/Playback Screen (Thumbnail Screen Off) 3 2 1 Insert a P2 card. 2 Press the PLAY button. Clips play back in the order they were recorded on the card. 3 Press the STOP button to stop playback. 2 3 4 1 Insert a P2 card. 2 Use the Up/Down/Left/Right cursor buttons to place the cursor on a clip to playback. 3 Press the PLAY button. Playback occurs in the order thumbnails are displayed. 4 Press the STOP button to stop playback. The thumbnail screen reappears when playback stops. 45 3D Signal Recording and Playback: Recording and Playback

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161

3D Signal Recording and Playback: Recording and Playback
45
3D Signal Recording and Playback
SDI and HDMI 3D video playback output is
available only during PLAY and STILL/PAUSE.
Discrete left and right output
:
Special playback is only displayed on the LCD,
and is not available as SDI output.
However, video is available at the master unit’s
SDI output when the SETUP - VIDEO -
DISCRETE BLACK menu setting is OFF.
Single-unit left/right (side-by-side or frame
packing) signal output method
:
The LCD monitor displays both L and R special
playback images, but only the L signal is output
(as both L and R images) to SDI/HDMI.
NOTE:
• Clips to be played back can be from different
slots in the master and slave units, but slots for
left and right video must correspond.
• 3D playback requires that the L (left-eye) clip be
present on the master unit, and the R (right-eye)
clip on the slave.
1
Insert a P2 card.
2
Press the PLAY button.
Clips play back in the order they were
recorded on the card.
3
Press the STOP button to stop playback.
Pressing the PLAY button starts playback from
the yellow-framed clip (selected by the cursor
buttons). On the thumbnail screen, clip playback
can be limited and re-ordered by selecting clips
or changing the display.
(
“3D Recording/Playback Mode (3D REC/PB)”
Vol. 2, page 37)
NOTE:
• Black numbers indicate clips available for
playback.
• 3D REC/PB mode does not support slot
selection by the THUMBNAIL - SLOT CLIPS
menu setting.
1
Insert a P2 card.
2
Use the Up/Down/Left/Right cursor buttons
to place the cursor on a clip to playback.
3
Press the PLAY button.
Playback occurs in the order thumbnails are
displayed.
4
Press the STOP button to stop playback.
The thumbnail screen reappears when
playback stops.
Playback
Playback from the Record/Playback
Screen (Thumbnail Screen Off)
2
3
Playback from the Thumbnail Screen
2
3
4