Panasonic AG-HPD24PJ Operating Instructions - Page 127

Settings and brief function description Item XX indicates factory default settings. CC (F1) BLANK Turns on and off closed caption signals in the first field output from the SD SDI and analog composite output. BLANK: Signals are forcibly blanked. THROUGH: Signals are not blanked. NOTE: • In EE mode, the closed captions are output superimposed on the input signal. CC (F2) BLANK Turns on and off closed caption signals in the second field output from the SD SDI and analog composite output. BLANK: Signals are forcibly blanked. THROUGH: Signals are not blanked. NOTE: • In EE mode, the closed captions are output superimposed on the input signal. CC REC Specifies whether or not the closed caption signal that is superimposed on the SD SDI input signal will be recorded. ON: A closed caption signal that is superimposed on an input signal is recorded. OFF: Not recorded. The EE output is also blanked. Selects the compression method used during video recording. COMPRESSION MODE DARK: Records video suppressing compression video distortion that is generated by dark areas that are about 10 IRE (70 mV) or less. NORMAL: Records using normal compression processing. NOTE: • This setting is available in DVCPRO HD 720p mode recording. WIDE SEL Specifies whether or not WIDE data will be recorded when the SETUP - SYSTEM - FORMAT menu setting is 480i or 576i. WIDE: Recorded NORMAL: Not recorded Selects output method for analog composite signals. SETUP OFF: Does not apply the setup to the output 7.5 %: Applies 7.5 % setup to the output EDH(SD) OUTPUT SEL DISCRETE BLACK Specifies whether or not EDH is superimposed on SDI OUT signals. ON: Signals are superimposed. OFF: Signals are not superimposed. Selects output connector to output digital audio and video. In main mode SDI: Output from the SDI connector HDMI: Output from the HDMI connector In 3D REC/PB mode and SYNC PB mode SDI (S/S): Output from the SDI connector in a side-by-side format DISCRETE L/R: Output from the SDI connector in a multicast format HDMI (S/S): Output from the HDMI connector in a side-by-side format HDMI (FP): Output from the HDMI connector in a framepacking format Selects output video for master side in playback modes other than PLAY or STILL when OUTPUT SEL is set to DISCRETE L/R. Black output is used for the slave side. ON: Black output OFF: Outputs video SYSTEM FREQ indications 59.94 Hz 59.94 Hz 59.94 Hz 59.94 Hz 50 Hz 59-23 Hz 60-24 Hz 59.94 Hz 50 Hz 59.94 Hz 23.98 Hz 59-23Hz 59.94 Hz 50 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz 59-23Hz 60-24 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz Mode 2D 3D SYNC PB (Main) M M M M M M M MM M M MM M M M 64 Setup Menu: Menu items