Panasonic AG-HPD24PJ Operating Instructions - Page 130

Setup Menu Item Settings and brief function description XX indicates factory default settings. REF LEVEL Selects the standard level. FS-20: -20 dB (AG-HPD24P default value) FS-18: -18 dB (AG-HPD24E default value) FS-12: -12 dB Selects channels to multiplex on the SD SDI output. CH1-4: Outputs four channels (CH1-4). CH5-8: Outputs four channels (CH5-8). CH1-8: Outputs eight channels (CH1-8). EMBD CH SEL NOTE: • Four channels (CH1-4) are always multiplexed during DV, DVCPRO and DVCPRO50 playback. • Some devices may not be able to receive 8 channels. Check the specifications of the receiving equipment before setting CH1-8. Selects audio output via monitor outputs. Selects CH1 and CH2 outputs. HDMI output audio also conforms to this setting. CH1 / CH2: Outputs CH1 to L and CH2 to R. MONITOR CH CH3 / CH4: Outputs CH3 to L and CH4 to R. CH1 + 3 / CH2 + 4: Outputs CH1 + 3 to L and CH2 +4 to R. CH5 / CH6: Outputs CH5 to L and CH6 to R. CH7 / CH8: Outputs CH7 to L and CH8 to R. CH5 + 7 / CH6 + 8: Outputs CH5 + 7 to L and CH6 + 8 to R. Turns the speaker output on or off. SPEAKER OUT ON: Output is provided to the speakers. OFF: No output is provided to the speakers. (BEEP sounds are not output, either.) SYSTEM FREQ indications Mode 2D 3D SYNC PB (Main) 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM M 59-23 Hz 60-24 Hz 59.94 Hz 50 Hz M 59.94 Hz 50 Hz 23.98 Hz 24 Hz 59-23 Hz 60-24 Hz M M M 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM M 59-23 Hz 60-24 Hz LEVEL METER Switches the channels that are indicated on the audio level meter. CH1-4: Indicates the levels for CH1 to CH4. CH5-8: Indicates the levels for CH5 to CH8. 59.94 Hz 23.98 Hz 50 Hz 24 Hz MM M 59-23 Hz 60-24 Hz DISPLAY Use this menu to make display settings. Item Settings and brief function description XX indicates factory default settings. Determines whether the thumbnail screen, menus, DIAG and other screens will be output via VIDEO OUT or SDI OUT. LCD: Not output (displayed only on LCD monitor) LCD&VIDEO: Output to VIDEO OUT. OSD OUTPUT ALL: Output to both VIDEO OUT and SDI OUT. NOTE: • When the SETUP - SYSTEM - FREQUENCY menu setting is 23.98 Hz or 59-23, only LCD and LCD&VIDEO are available. • ALL can only be selected in main mode. OSD GRADE Places a superimposed display on the video screen. ALL: Displays all. MODE&TC: Displays mode and time code. SYSTEM FREQ indications 59.94 Hz 50 Hz 23.98 Hz 59-23 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz Mode 2D 3D SYNC PB (Main) MM M MM M 59-23 Hz 60-24 Hz Setup Menu: Menu items 67