Panasonic AG-HPD24PJ Operating Instructions - Page 37
External Connections, USB Device, USB HOST
![]() |
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
External Connections External Connections USB Device A P2 card in this unit's P2 card slot can be accessed as a mass storage device by connecting the unit to a PC using USB 2.0. In this case, the PC must have a driver installed (for USB 2.0). Clips recorded on P2 cards can also be viewed on a PC using our free P2 Viewer, downloadable from our website (➝ "Website URL" page 11). (➝ "USB Device Mode" Vol. 2, page 36) • To change the USB device mode, press the MODE button, select USB DEVICE using the Up/Down cursor buttons, and press SET. USB HOST Connect a USB2.0 or USB3.0 storage device to the USB 3.0 HOST port (➝ "Slots, etc." page 21, no. 5 in the illustration) to save P2 card data to the external storage device, view saved clip thumbnails, and write the data back to a P2 card. Clips on the external storage device can be easily played back for review. To use the USB 3.0 HOST port for an external storage device, set STORAGE - UBS HOST to ENABLE in the menu. (➝ "Connecting an External Device via the USB HOST Connector" Vol. 2, page 27) ◆ NOTE: • Recording is disabled when STORAGE - UBS HOST is set to ENABLE in the menu. • The USB HOST port is only enabled in the main mode. • The ENABLE setting is automatically reset to DISABLE when power is turned off. • Use a USB 3.0-standard compliant cable to connect to the USB 3.0 port. • If a USB 2.0 cable is used, the storage device will be recongized as USB 2.0. External Connections: USB Device 37
![](/manual_guide/products/panasonic-aghpd24pj-operating-instructions-beba769/37.png)