Panasonic AG-HPD24PJ Operating Instructions - Page 50

stopping, select the clips to be paired on the thumbnail screen and press PLAY or STILL/ PAUSE to synchronize the clips correctly. Playback from the Playback Screen (Thumbnail Screen Off) 3 2 1 Insert P2 cards in both master and slave units. 2 Press the PLAY or STILL/PAUSE button on the master unit. Pressing the button automatically cues the slave position to the master (matches the clip numbers and time codes). Pressing PLAY also starts playback. ◆ NOTE: • When the first position of the master clip is earlier than that of the slave, the master is cued to the first position of the slave. 00:00:00:00 00:00:01:00 Master clip Slave clip Master playback Cuing Slave playback 3 Press the STOP button on the master unit to stop playback. 50 Synchronous Playback: Playback ◆ NOTE: • When stopped, no image (black screen) is displayed. • Signal output is as follows. Discrete left and right output method: Special playback video and video when left and right signals are invalid (such as TC mismatch) is displayed only on the LCD monitor, but is not output as SDI. However, video is available at the master unit's SD output when the SETUP - VIDEO - DISCRETE BLACK menu setting is OFF. 3D single-unit (side-by-side or frame packing) signal output method: Special playback video and video when left and right images are invalid (such as TC mismatch) appears as both L and R images on the LCD monitor, but only the L signal is output (as both L and R images) to SDI/HDMI.