Panasonic AG-HPD24PJ Operating Instructions - Page 40

Playback Connection Example When connecting a 3D monitor for viewing 3D video, select the signal connector and format to suit the monitor type or display method. The unit's output connector and signal format are selected by the SETUP - VIDEO - OUTPUT SEL menu setting. OUTPUT SDI OUT Jack HDMI OUT SEL Port DISCRETE Discrete left and No output L / R right output SDI (S / S) Side-by-side No output (half) method output HDMI No output Side-by-side (S/S) (half) method output HDMI (FP) No output Frame packing method output 3D Single-Signal Output (Side-By-Side/Frame Packing) Connection Example AG-HPD24 (Master/3D-L) Video (Composite) Output D RightSide Playback Signal An input ASync Signal reference signal can be connected to the REF IN jack on the slave. C LINK (D-SUB) HDMI or SDI Output SD Monitor B LINK (USB) 3D Monitor AG-HPD24 (Slave/3D-R) Connect the master and slave units together with a USB 2.0 cable between the LINK (USB) ports, an RS-422A/D-SUB9P cable between the LINK (D-SUB) connectors, and BNC cables between the synchronizing jacks, as illustrated. With these connections, setting the units to 3D REC/PB mode enables 3D playback. The 3D side-by-side or frame packing (HDMI-only) signal is output from the master (L) SDI or HDMI output connector, and 3D video can be viewed on the 3D monitor. 40 3D Signal Recording and Playback: Connections