Panasonic AG-HPD24PJ Operating Instructions - Page 89
Checking Card Status, choose the PROPERTY - CARD STATUS menu
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Checking Card Status Use the following steps to view P2 card slot status, P2 card usage and other card information on the screen. 3 1) 2) 2 3) 1 Open the thumbnail screen. 2 Press the MENU button. 3 Use the Up/Down/Left/Right cursor buttons to Or choose the PROPERTY - CARD STATUS menu setting and press the SET button. The status of P2 card will be displayed. ◆ NOTE: • Choose the PROPERTY - PROPERTY SETUP - P2CARD CAP menu setting to switch between remaining free space and used space. 4) (➝ Setup Menu "PROPERTY" - "PROPERTY SETUP - P2 CARD CAP" page 53) 5) 6) 26 Main Mode: Thumbnail Screen 1)Write protect mark A write-protected P2 card is indicated by the mark displayed here. 2)P2 card status The remaining free memory on the P2 card is displayed here in the form of a bar meter and a percentage value. Memory used on the P2 card is also displayed in the form of a bar meter and a percentage value. The following status information may also appear depending on card status.