Panasonic AW-HE42 IP Control Specifications - Page 115

HD Integrated Camera 3.2.9. AWB/ABB setting Interface Specifications These commands select the AWB mode of the camera, execute AWB/ABB and enable the current AWB mode status to be acquired. Command name AWB (AWC) execution control command AWB execution underway status display On/Off control command AWB execution underway status display On/Off query command AWB (AWC) Mode control command Category Control Notification Control Response Request Response Control Table 3.2.9. AWB/ABB setting Command Data value Setting Remarks OWS OWS ER3:OWS ER2:OWS OSA:88:[Data] OSA:88:[Data] QSA:88 OSA:88:[Data] OAW:[Data] None AWB (AWC) is executed. AWC/AWB OK AWC/AWB NG AWC/AWB NG (Busy)  There is no response which supports this control command. Notification is given by the separate update notification function. For details, refer to "4. Camera information update notification". 0 Off 1 On  On or Off for screen display of AWB OK/NG.  The status is fixed at Off when TALLY signals are present. ※The AK-UB300 is supported by V7.20 or a later version. None ※The AK-UB300 is supported by V7.20 or a later version.. 0 Off 1 On In the case of the AW-HE50/AW-HE60 0 ATW 1 AWB A 2 AWB B 3 ATW  Disabled at the FullAuto setting (ER3 is returned). In the case of the AW-HE120 0 ATW 1 AWB A 2 AWB B 3 ATW 4 PRESET 3200K 5 PRESET 5600K In the case of the AW-HE130/AW-HR140/AW-HE40/ AW-UE70/AW-HE42/AW-UE150 0 ATW 1 AWB A 2 AWB B 3 ATW 4 PRESET 3200K 5 PRESET 5600K 9 VAR Response OAW:[Data] © Panasonic Corporation 2020 All Rights Reserved. - 115 -