Panasonic AW-HE42 IP Control Specifications - Page 147

HD Integrated Camera 3.2.16. Backlight compensation setting Interface Specifications These commands exercise On/Off control over the backlight compensation of the camera and enable the current settings to be acquired. Command name Backlight compensation control command Backlight compensation query command Table 3.2.16. Backlight compensation setting Category Command Data value Setting Remarks Control OSE:73:[Data] 0 Off 1 On  Disabled at the FullAuto setting (ER3 is returned). Response OSE:73:[Data] Request QSE:73 None Response OSE:73:[Data] 0 Off 1 On ■ In the case of the AW-HE50/ AW-HE60  When On is set for auto iris, or Auto is set for Frame Mix or Gain, the setting is accepted but it is not reflected in the images. The setting is reflected in the images when auto iris is changed from On to Off, or Frame Mix or Gain is changed to Manual. ※Supported only by the AW-HE50/AW-HE60/AW-HE40/A W-UE70/AW-HE42. ※Supported only by the AW-HE50/AW-HE60/AW-HE40/A W-UE70/AW-HE42. Example of use) ・Backlight compensation: Off [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:73:0&res=1 [Response] AW-HE50 → PC 200 OK "OSE:73:0" © Panasonic Corporation 2020 All Rights Reserved. - 147 -