Panasonic AW-HE42 IP Control Specifications - Page 32

HD Integrated Camera Command name Category Command Interface Specifications Data value Setting Remarks 09h IF/NET UART Framing Error 17h IF/FPGA UART Buffer Overflow 19h IF/NET UART Buffer Overflow 21h System Error(IF/SERVO Error) 22h PT Limit Over 24h NET Life-monitoring Error 25h BE Life-monitoring Error 26h IF/BE UART Buffer Overflow 27h IF/BE UART Framing Error 28h IF/BE UART Buffer Overflow 29h CAM Life-monitoring Error ※ Not supported by the AK-UB300. In the case of the AW-UE150 00h Disable Normal 03h Enable Motor Driver Error 04h Pan Sensor Error 05h Tilt Sensor Error 06h Controller RX Over run Error 07h Controller RX Framing Error 08h Network RX Over run Error 09h Network RX Framing Error 17h Controller RX Command Buffer Overflow 19h Network RX Command Buffer Overflow 21h System Error 22h Spec Limit Over 23h FPGA Config Error 24h NET Life-monitoring Error 25h BE Life-monitoring Error 26h IF/BE UART Buffer Overflow 27h IF/BE UART Framing Error 28h IF/BE UART Buffer Overflow 29h CAM Life-monitoring Error 31h Fan1 error 32h Fan2 error 33h High Temp 36h Low Temp 40h Temp Sensor Error 41h Lens Initialize Error 42h PT. Initialize Error 50h MR Level Error 52h MR Offset Error 53h Origin Offset Error 54h Angle MR Sensor Error 55h PT. Gear Error 56h Motor Disconnect Error Example of use) Error information acquisition [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RER&res=1 [Response] AW-HE50 → PC 200 OK "rER[Data]" © Panasonic Corporation 2020 All Rights Reserved. - 32 -