Panasonic AW-HE42 IP Control Specifications - Page 17

HD Integrated Camera 3.1.5. Lens operations 3.1.5.1. Zoom Interface Specifications These commands control the zooming (between Wide and Tele) of the camera lens and enable the current zoom position and zooming speed to be acquired. Commands which control the zooming are also described in section "3.2.1.3.Zoom" of "3.2.Camera control". Command name Zoom (position control) control command Zoom (position control) query command Zoom position query command Table 3.1.5.1. Zoom Category Command Data value Setting Control #AXZ[Data] 555h Wide ～ ～ Response axz[Data] Request #AXZ Response axz[Data] FFFh Tele None 555h Wide ～ ～ Request #GZ Response gz[Data] FFFh None 555h Tele Wide Remarks ※ Not supported by the AK-UB300. ～ ～ Zoom (speed control) control command Control #Z[Data] ～ FFFh "---" 01 49 50 51 Tele Standby Wide Max. Speed The "---" setting is supported only by the AW-HE50/AW-HE60/ AW-HE40/ AW-UE70/AW-HE42/AW-UE150. ※ Not supported by the AK-UB300. Zooming speed to be controlled ～ Wide Min. Speed Zoom Stop Tele Min. Speed ～ ～ 99 Tele Max. Speed Response zS[Data] ※ Not supported by the AK-UB300. Example of use) ・Zoom: Tele [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXZFFF&res=1 [Response] AW-HE50 → PC 200 OK "axzFFF" ・Speed control: zooming max. speed in Wide direction [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23Z01&res=1 [Response] AW-HE50 → PC 200 OK "zS01" © Panasonic Corporation 2020 All Rights Reserved. - 17 -