Panasonic AW-HE42 IP Control Specifications - Page 19

HD Integrated Camera [Response] AW-HE50 → PC 200 OK "d11" 3.1.5.3. Iris Interface Specifications These commands control the iris (between Close and Open) of the camera and enable the current iris position to be acquired. In addition, they enable Auto/Manual control of the iris and the current iris Auto/Manual statuses to be acquired. Commands which control the iris are also described in section "3.2.1.2. Iris" of "3.2. Camera control". Command name Iris position control command Iris position query command Category Control Response Control Response Request Response Table 3.1.5.3. Iris Command #I [Data] Data value 01 Setting Iris Close ～ ～ ～ ～ iC[Data] 99 Iris Open #AXI [Data] 555h Iris Close axi [Data] FFFh Iris Open #AXI None axi [Data] 555h Iris Close ～ ～ Iris position Auto/Manual query command Request #GI Response gi [Data1] [Data2] FFFh None [Data1] 555h Iris Open Iris Close ～ ～ FFFh "---" [Data2] 0 1 Iris Open Standby Manual Iris Auto Iris Auto Iris On/Off control command Auto Iris On/Off query command Control #D3[Data] Response d3[Data] Request #D3 Response d3[Data] 0 1 None 0 1 Manual Iris Auto Iris Manual Iris Auto Iris Remarks ※ Not supported by the AK-UB300. ※ Not supported by the AK-UB300.  The "---" setting is supported only by the AW-HE50/AW-HE60/ AW-HE40/ AW-UE70/AW-HE42/AW-UE150.  In case of AW-HE130/AW-HR140, auto focus cannot be set to On when FrameMix is set to 18 [dB] or higher. ※ Not supported by the AK-UB300. ※ Not supported by the AK-UB300. ※ Not supported by the AK-UB300. Example of use) ・Iris: Open [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23I99&res=1 [Response] AW-HE50 → PC 200 OK "iC99" ・Iris: Close [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXI555&res=1 [Response] AW-HE50 → PC 200 OK "axi555" © Panasonic Corporation 2020 All Rights Reserved. - 19 -