Panasonic AW-HE42 IP Control Specifications - Page 12

HD Integrated Camera 3.1.2. Installation and smart picture flip commands Interface Specifications These commands control the method used for the installation of the camera (stand-alone or suspended) and smart picture flip, and they enable the current installation and smart picture flip settings to be acquired. Command name Installation position control command Installation position query command Smart picture flip Auto/Off control command Smart picture flip Auto/Off query command Smart picture flip angle setting control command Smart picture flip angle setting query command Category Control Response Request Response Control Response Request Response Control Response Request Response Table 3.1.2. Installation position Command Data value Setting Remarks #INS[Data] 0 1 Desktop Hanging ※ Not supported by the AK-UB300. iNS[Data] #INS None ※ Not supported by the AK-UB300. iNS[Data] 0 Desktop 1 Hanging #SPF[Data] 0 sPF[Data] 1 Off Auto  This command enables smart picture flip to be set to Auto or Off ※Only supported by the #SPF sPF[Data] None 0 1 Off Auto AW-HE120/AW-HE130/AW-HR140/AW-UE150. ※Only supported by the AW-HE120/AW-HE130/AW-HR140/AW-UE150. #FDA[Data] 3Ch 60degree  This command enables the angle of smart ～ ～ fDA[Data] #FDA 78h None 120degree picture flip to be set. ※Only supported by the AW-HE120/AW-HE130/AW-HR140/AW-UE150. ※Only supported by the fDA[Data] 3Ch 60degree AW-HE120/AW-HE130/AW-HR140/AW-UE150. ～ ～ 78h 120degree Example of use) ・Installation position: Desktop [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23INS0&res=1 [Response] AW-HE50 → PC 200 OK "iNS0" ・Smart picture flip: Auto [Control] PC → AW-HE120 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23SPF1&res=1 [Response] AW-HE120 → PC 200 OK "sPF1" ・Smart picture flip angle: 60deg [Control] PC → AW-HE120 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23FDA3C&res=1 [Response] AW-HE120 → PC 200 OK "fDA3C" © Panasonic Corporation 2020 All Rights Reserved. - 12 -