Panasonic AW-HE42 IP Control Specifications - Page 266

HD Integrated Camera Interface Specifications 4.4.6. AWB Mode switching The contents of the table below are posted in succession by update notifications when the AWB Mode setting has been switched. Table 4-12 Notification OAW ORI AWB Mode R Gain Remarks ※Only supported by the AW-HE120/AW-HE130/AW-HR140. OBI B Gain ※Only supported by the AW-HE120/AW-HE130/AW-HR140. ORG R Gain ※Notified by AW-HE50 Ver.2 or subsequent versions or by AW-HE60/ AW-HE40/AW-UE70/AW-HE42. OBG OSG:39 OSG:3A B Gain R Gain B Gain ※Notified by AW-HE50 Ver.2 or subsequent versions or by AW-HE60/ AW-HE40/AW-UE70/AW-HE42. ※Notified by AW-UE150. ※Notified by AW-UE150. ※ The R gain and B gain are notified only when the AWB mode after switching has been set to AWB A or AWB B. The sequence below is followed when the AWB Mode is switched. 【AWB Mode switching sequence】 This sequence is followed if AWB Mode is switched to "AWB A". As the response to the AWB Mode switching command, "OAW:1" is returned, and the R gain and B gain settings stored for the AWB Mode after switching are posted in sequence by update notifications. PC1 (Client) AW-HE120 http://192.168.0.10/cgi-bin/aw_cam?cmd=OAW:1 &res=1 200 OK "OAW:1" [CR][LF] OAW:1 [CR][LF] [CR][LF]ORI:096 [CR][LF] ※ [CR][LF]OBI:096 [CR][LF] ※ ※ The R gain and B gain update notifications are supported by Ver.2 or a later version for the AW-HE50. ※ In AW-HE50 Ver.2 or subsequent versions or in AW-HE60/AW-HE40/ AW-UE70/AW-HE42, if AWB A or AWB B is set as the AWB mode after switching, ORG or OBG is posted instead of ORI or OBI. Fig.4-13 AWB Mode switching © Panasonic Corporation 2020 All Rights Reserved. - 266 -