Panasonic AW-HE42 IP Control Specifications - Page 171
Smart picture flip information
![]() |
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
HD Integrated Camera 3.2.23. Smart picture flip information Interface Specifications This command enables the status of the camera's smart picture flip to be acquired. Command name Smart picture flip status query command Category Request Table 3.2.23. Smart picture flip information Command Data value Setting Remarks QFS None Basically, the information is generated by the camera itself, and posted. The current status is posted at startup as well. Current status queries are also supported by the query command. Response OFS:[Data] 0 1 Normal Flip Normal is switched to Flip or vice versa depending on the Install Position setting. ※Only supported by the AW-HE120/AW-HE130/AW-HR140 /AW-UE150. Example of use) ・Smart picture flip status acquisition [Control] PC → AW-HE120 http://192.168.0.10/cgi-bin/aw_cam?cmd=QFS&res=1 [Response] AW-HE120 → PC 200 OK "OFS:[Data]" © Panasonic Corporation 2020 All Rights Reserved. - 171 -
![](/manual_guide/products/panasonic-awhe42-ip-control-specifications-f4b7fd2/171.png)