Panasonic AW-HE42 IP Control Specifications - Page 43

HD Integrated Camera 3.2.1. Lens operations Interface Specifications 3.2.1.1. Focus These commands exercise Auto/Manual control of the focusing and one-touch auto focus control of the camera. Commands which control the focusing are also described in section "3.1.5.2. Focus" of "3.1. Pan-tilt head control". Command name Focus Auto/Manual control command Focus Auto/Manual query command One-touch focus control command Focus control (toward FAR end) control command Focus control (toward NEAR end) control command Focus control (STOP) control command Focus speed setting control command Touch AF Category Control Table 3.2.1.1. Focus Command Data value Setting OAF:[Data] 0 1 Manual Auto Response Request Response Control Response Control OAF:[Data] QAF OAF:[Data] OSE:69:[Data] OSE:69:1 HFF None 0 1 1 None Manual Auto One Touch AF Response HFF Control HFN None Response HFN Control HFS None Response HFS Control LFS:[Data] 0 Slow ～ ～ Response Control Response LFS:[Data] OSJ:28:[Data 1]:[Data2] OSJ:28:[Data 1]:[Data2] 9 ［Data 1］ 00h ～ 64h ［Data 2] 00h ～ 64h Fast ［Data1］H Pos. 0% ～ 100% ［Data2]V Pos. 0% ～ 100% Remarks  In case of AW-HE130/AW-HR140, focus cannot be set to Auto when FrameMix is set to 18 [dB] or higher. ※ Not supported by the AK-UB300. ※ Not supported by the AK-UB300. One-touch focus On control ※ Not supported by the AK-UB300. ※ Only supported by the AK-UB300. ※ Only supported by the AK-UB300. ※ Only supported by the AK-UB300. ※ Only supported by the AK-UB300. ※ Only supported by theAW-UE150. Example of use) ・Focus (Auto/Manual): Auto [Control] PC → AW-HE50 © Panasonic Corporation 2020 All Rights Reserved. - 43 -