Panasonic AW-HE42 IP Control Specifications - Page 20

HD Integrated Camera ・Auto iris: On [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23D31&res=1 [Response] AW-HE50 → PC 200 OK "d31" Interface Specifications 3.1.6. Lens information notification These commands enable On or Off to be set for the lens information notification of the camera and the current lens information notification On/Off status and lens information to be acquired. Command name Lens information notification On/Off control command Lens information notification On/Off query command Lens information query command Table 3.1.6. Lens information notification On/Off Category Command Data value Control #LPC[Data] 0 Off 1 On Setting Remarks Off: Information is not posted. On: Information is posted. ※ Not supported by the Response lPC[Data] Request #LPC None Response lPC[Data] Request #LPI 0 1 None Response lPI [Data1] [Data1] [Data2][Data3] 555h ～ FFFh [Data2] 555h ～ FFFh [Data3] 555h AK-UB300. ～ ～ Off On [Data1] Zoom Position Wide Tele [Data2] Focus Position Near Far [Data3] Iris Position Close ※ Not supported by the AK-UB300. Off: Information is not posted. On: Information is posted. ※ Not supported by the AK-UB300. [Data1] Same return as #GZ [Data2] Same return as #GF [Data3] Same return as #GI  The command is sent periodically (every 300 ms) to all the channels to which the command can be sent. ～ ～ FFFh Open Example of use) ・Lens information notification: On [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LPC1&res=1 [Response] AW-HE50 → PC 200 OK "lPC1" ・Lens information acquisition [Control] PC → AW-HE50 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LPI&res=1 [Response] AW-HE50 → PC 200 OK "lPI [Data1][Data2][Data3]" © Panasonic Corporation 2020 All Rights Reserved. - 20 -