Panasonic AW-HE42 IP Control Specifications - Page 262

HD Integrated Camera Interface Specifications 4.4.3. LPI information (lens information) Notification is sent in a 300ms cycle when "On: Information is posted" has been set for the lens information notification On/Off control command in "3.1.6. Lens information notification" and a change has been made in the LPI information (lens information). (LPI information notifications are not supported for the AK-UB300.) The information posted is given below. Notification lPI [ZZZ] [FFF] [III] Table 4-8 Lens information ZZZ Zoom position FFF Focus position III Iris position Given below is the sequence which is followed when changes in the LPI (lens) information are received. 【Sequence when LPI information (lens information) is changed】 When the camera detects changes in the LPI (lens) information, the changed LPI (lens) information is sent to the terminals, and terminals PC1 and PC2 receive this information. PC2 (Client) PC1 (Client) [CR][LF] lPI555555555 [CR][LF] [CR][LF] lPI555555555 [CR][LF] Camera LPI information (lens information) changed Fig.4-10 Sequence when LPI information is changed © Panasonic Corporation 2020 All Rights Reserved. - 262 -