Panasonic AW-HE42 IP Control Specifications - Page 125

HD Integrated Camera 3.2.10. Detail setting Interface Specifications These commands control the detail of the camera and enable the current settings to be acquired. Command name Detail control command Detail query command H.DTL LEVEL H control command H.DTL LEVEL H query command H.DTL LEVEL L control command H.DTL LEVEL L query command H.DTL LEVEL control command H.DTL LEVEL query command Category Control Response Request Response Control Response Request Response Table 3.2.10. Detail setting Command Data value Setting Remarks ODT:[Data] In the case of the AW-HE50/AW-HE60/AW-HE120/AW-HE40/AW-UE70/AW-HE42 0 Off Disabled at the FullAuto setting 1 Low (ER3 is returned). 2 High In the case of the AW-HE130/AK-UB300/AW-HR140/AW-UE150 0 Off 1 On 2 On ODT:[Data] QDT None ODT:[Data] In the case of the AW-HE50/AW-HE60/AW-HE120/AW-HE40/AW-UE70/AW-HE42 0 Off 1 Low 2 High Disabled at the FullAuto setting (ER3 is returned). In the case of the AW-HE130/AK-UB300/AW-HR140/AW-UE150 0 Off 1 On 2 On OSD:0A:[Data] 02h 2 ～ ～ 3Fh 63 OSD:0A:[Data] QSD:0A None OSD:0A:[Data] 02h 2  Even when Off is selected as the detail setting, this command is received, and its setting is reflected.  The setting can never be lower than the H.DTL LEVEL L. ※Only supported by the AW-HE120. ※Only supported by the AW-HE120. ～ ～ 3Fh 63 Control OSD:12:[Data] 01h 1 ～ 3Eh 62 Response OSD:12:[Data] Request QSD:12 None Response OSD:12:[Data] 01h 1 ～  Even when Off is selected as the detail setting, this command is received, and its setting is reflected.  The level is set to less than the H.DTL LEVEL H setting. ※Only supported by the AW-HE120. ※Only supported by the AW-HE120. ～ ～ 3Eh 62 Control OSA:31:[Data] 00h 0 ※Only supported by the AK-UB300. ～ ～ Response OSA:31:[Data] 3Fh 63 Request QSA:31 None Response OSA:31:[Data] 00h 0 ※Only supported by the AK-UB300. ～ ～ 3Fh 63 © Panasonic Corporation 2020 All Rights Reserved. - 125 -