Ricoh Aficio MP W3600 General Settings Guide - Page 110

Printer Features ❖ Memory Usage You can select the amount of memory used in Font Priority or Frame Priority, according to paper size or resolution. The default setting is Frame Priority. • Font Priority This setting uses memory for registering fonts. • Frame Priority This setting uses frame memory for high speed printing. ❖ Copies You can specify the number of print sets. This setting is disabled if the num- ber of pages to print has been specified with the printer driver or another command. 4 The default setting is 1. The number of copies can be specified from 1 to 999 by increments of one. ❖ Blank Page Print You can select whether or not to print blank pages. The default setting is On. Pages that match one of the following conditions are identified as blank. • There are no images. • There are images but they are outside the printable area. • There are only blank characters. ❖ Reserved Job Waiting Time You can specify how long the machine waits to receive a print job before allowing other functions such as the copier and scanner functions to interrupt it. The default setting is Short Wait. ❖ Printer Language Specify the printer language. The default setting is Auto. This menu appears only when the PostScript 3 unit is installed. ❖ Sub Paper Size You can enable the Auto Substitute Paper Size (A4, LT) feature. The default setting is Off. ❖ Bypass Tray Setting Priority Specify whether (Printer) Driver / Command or Machine Settings, has priority for determining the paper size for the bypass tray. The default setting is Driver / Command. ❖ Edge to Edge Print You can select whether or not to print on the entire sheet. The default setting is Off. The 5 mm margin along the edges may not be printed properly. 102