Ricoh Aficio MP W3600 General Settings Guide - Page 44

System Settings ❖ Warm-up Beeper (copier/Document Server) You can have the beeper sound when the machine becomes ready to copy after leaving Energy Saver mode, or when the power is turned on. The default setting is On. If the Panel Tone setting is [Off], the beeper does not sound, whatever the Warm Up Notice setting. ❖ Copy Count Display (copier/Document Server) 2 The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down). The default setting is Up. ❖ Function Priority Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on. The default setting is Copier. ❖ Print Priority Print Priority is given to the mode selected. The default setting is Display Mode. When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets. ❖ Function Reset Timer You can set the length of time the machine waits before changing modes when using the multi-access function. This is useful if you are making many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions. The default setting is Set Time. When you select [Set Time], enter the time (3-30 seconds, in 1 second increments) using the number keys. The default setting for Function Reset Time is 3 second(s). The Function Reset Timer setting is ignored if Interleave is set for Print Priority. ❖ Interleave Print You can set the timing for changing modes when [Print Priority] has been set to [Interleave]. The default setting is 10 sheet(s). You can set the number from 1 to 20 sheets using the number keys. ❖ Output: Document Server Specify a tray to which documents are delivered. The default setting is Upper Paper Exit. ❖ Output: Printer Specify a tray to which documents are delivered. The default setting is Upper Paper Exit. 36