Ricoh Aficio MP W3600 General Settings Guide - Page 26

Connecting the Machine Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. 1 Ethernet This section lists the settings required for sending files with an Ethernet connection. For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name File Transfer Default User Name / Password (Send) File Transfer Scanner Resend Interval Time File Transfer Number of Scanner Resends Setting Requirements Necessary As required As required As required As required As required Necessary As required Necessary As required As required As required As required As required As required Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.48 "Interface Settings" p.54 "File Transfer" 18