Ricoh Aficio MP W3600 General Settings Guide - Page 117

Scan Settings Scan Settings This section describes the user tools in the Scan Settings menu under Scanner Features. Default settings are shown in bold type. ❖ Next Original Wait Setting To divide originals and scanning them individually to make a single file, se- lect [Off], [Set Wait Time], or [Continuous Wait] for the waiting status. The default setting is Set Wait Time. The default setting time is 60 sec.. If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals with the number keys. Scanning will start if additional originals are placed and the {Start} key is pressed within this time. You can end scanning and begin transmission by pressing the {q} key within this time. Once the specified time has elapsed, transmission starts automatically. If [Continuous Wait] is selected, the machine will wait for additional originals until the {q} key is pressed. Scanning will start when additional originals 5 are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {q} key. If a paper misfeed occurs or any of the following operations are performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {q} key is pressed. • Changing the settings such as the scan settings • Opening the scanner cover • Pressing the {Interrupt} key to activate the copy mode Reference p.3 "Accessing User Tools" "Scan Settings", Scanner Reference "Scan Size", Scanner Reference 109