Ricoh Aficio MP W3600 General Settings Guide - Page 31

Network Settings IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see "Interface Settings". 1 Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name Interface Settings/ IEEE 802.11b Communication Mode Interface Settings/ IEEE 802.11b SSID Setting Interface Settings/ IEEE 802.11b Channel Interface Settings/ IEEE 802.11b Security Method Interface Settings/ IEEE 802.11b Transmission Speed Setting Requirements Necessary As required As required As required As required As required Necessary Necessary As required As required As required Necessary As required As required As required As required Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.48 "Interface Settings" 23