Samsung SHR-5162 User Manual - Page 48

Smart Viewer INTRODUCTION Smart Viewer is a program to be installed on your PC. Using this program, you can monitor the video and audio data in real time through the network environment without accessing the site where the product is installed. MAIN FEATURES  MPEG-4 Video Compression: It provides good video quality.  G.711 Voice Compression: It provides good audio quality and use of directional MIC can improve the quality of remote voice.  Transmission of video/audio streams through RTP (Real-Time Transport Protocol): The real-time video playback feature is excellent and the transmission speed is not lowered abruptly even in multi-user connection.  Commands & controls by RTSP (Real-Time Streaming Protocol): It enables safety control through the network.  Multiple transport protocols are supported (TCP/IP and UDP (Unicast, Multicast)).  Access to video and audio data by entering IP address only.  Real-time recording (*.dvr format) on PC and recorded video data conversion into frame unit (JPEG format).  Up to 3 users can connect to the DVR simultaneously. (If the multicast is used, up to 6 users can connect.)  A Smart Viewer can connect to 16 DVRs simultaneously.  The Smart Viewer is optimized for the resolution of 1024x768. PC SPECIFICATION (RECOMMENDED)  OS: Win2000 and WinXP  Recommendation - DVR Pentium 3, 1GHz or higher - RAM 256 MB or higher - VGA RAM 32Mb or higher - DirectX 8.1 or higher The number of playback frames may vary depending on the recording rate, video size, and PC specification. For the detailed specification, refer to Appendix 5. Smart Viewer INSTALLATION 1. Insert the Smart Viewer program CD into the CD ROM drive. 2. Open the Smart Viewer folder. 3. Execute the "Setup.exe" file. 4. Click Next >. 44_ Smart Viewer SHR-5162_Eng.indb 44 2007-06-18 11:49:25