Sharp AR-BC260 ARBC260 Operation Manual - Page 104
Transparency film with insert sheets, Touch the [TRANSPARENCY INSERTS]
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
SPECIAL MODES Transparency film with insert sheets When copying onto transparency film, blank insert sheets can be placed between transparent sheets. Example: Inserting insert sheets between transparencies Originals (1-sided) GInsert sheets cannot be copied on in any mode. GThis mode can be selected only in the 1-sided to 1- 2 4 4 3 2 1 Originals (2-sided) 3 1 4 3 2 1 Insert sheets sided and 2-sided to 1-sided modes. GA multiple number of copies cannot be selected in this mode. GTransparency film must be fed from the bypass tray. GInsert sheets must be the same size (8-1/2" x 11" or 8-1/2" x 11"R (A4 or A4R)) as the transparency film. GFor best results, use SHARP recommended transparency film. For two-sided originals, this is only possible when using a reversing single pass feeder. Before performing the following procedure, touch the [OUTPUT] key in the main screen of Copy mode to display the OUTPUT settings screen (page 5-5), and then touch the [LEFT TRAY] key* to set the output tray to the left tray*. * If the optional saddle stitch finisher is installed, touch the [FINISHER TRAY] key to set the output tray to the finisher tray. 1 Touch the [TRANSPARENCY INSERTS] key on the SPECIAL MODES screen. COPY The [TRANSPARENCY INSERTS] key is TRANSPARENCY INSERTS highlighted to indicate that the function is turned on, and the transparency inserts icon ( , etc.) appears in the upper left of the screen. 2 Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of copy mode. 3 Load transparency film into the bypass tray. Remove any paper already in the bypass tray before loading the transparency film. (To load paper in the bypass tray, see pages 2-4 and 2-5.) 4 Touch the [PAPER SELECT] key and select the transparency film loaded in the bypass tray. 8½x11 PLAIN PAPER HEAVY PAPER AUTO ORIGINAL AUTO EXPOSURE Touch the [TRANSPARENCY] key. TRANSPARENCY ENVELOPE PAPER SELECT 100% COPY RATIO 6-8 5 Touch the [SPEED MODE] key or the [QUALITY MODE] key for the transparency film. PLEASE SELECT TRANSPARENCY MODE. SPEED MODE is for fast OK SPEED MODE QUALITY MODE printing. QUALITY MODE is for a high quality image. After touching either key EXTRA SIZE BASIC SETTING followed by the [OK] key, you will return to the main screen of copy mode. 6 Touch the [PAPER SELECT] key again and select the paper (8-1/2" x 11" (A4) or 8-1/2" x 11"R (A4R) size) to be used for the inserts. READY TO COPY. 1. 8½x11 2. 8½x14 3. 11x17 4. 8½x11R PLAIN RECYCLED COLOR PLAIN INTERRUPT 0 8½x11 AUTO ORIGINAL PLAIN PAPER HEAVY PAPER AUTO EXPOSURE TRANSPARENCY ENVELOPE PAPER SELECT 100% COPY RATIO About the steps that follow If a reversing single pass feeder is being used, see pages 5-2 and 5-3. If the document glass is being used, see pages 5-7 and 5-8. To cancel the TRANSPARENCY INSERTS function, touch the [TRANSPARENCY INSERTS] key again on the SPECIAL MODES screen. NOTE When the copy job is finished, remove any transparencies that remain in the bypass tray.