Sharp AR-BC260 ARBC260 Operation Manual - Page 73
REVERSING SINGLE PASS FEEDER, Acceptable originals, Size and weight of acceptable originals, Notes - ink
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
REVERSING SINGLE PASS FEEDER The reversing single pass feeder can be used to automatically feed originals for continuous copying. Both sides of two-sided sheet originals can be scanned without having to manually turn the originals over. This feature is convenient for making copies of a large number of originals. Acceptable originals When the reversing single pass feeder is used, up to 40 originals of the same size can be set in the feeder (maximum stack thickness of 11/64" (4 mm), or 30 originals of weight 24 lbs. (90 g/m2)). I Size and weight of acceptable originals 5-1/2" x 8-1/2" Original size: or A5 (148 x 210 mm) Weight (thickness): 11" x 17" or A3 (297 x 420 mm) 15 lbs. or 56g/m2 24 lbs. or 90g/m2 g/m2 ... Weight of a sheet of paper of 1 m2 4 Notes on use of the reversing single pass feeder GUse originals within the specified size and weight ranges. Use of originals out of the specified range may cause an original misfeed. GBefore loading originals into the document feeder tray, be sure to remove any staples or paper clips. GIf originals have damp spots from correction fluid, ink or glue from pasteups, be sure they are dried before they are fed. If not, the interior of the document feeder or the document glass may be soiled. GTo prevent incorrect original size detection, original misfeeds or smudges on copies, use the following as a guide for feeding originals. Transparency film, tracing paper, carbon paper, thermal paper or originals printed with thermal transfer ink ribbon should not be fed through the document feeder. Originals to be fed through the feeder should not be damaged, crumpled or folded or have loosely pasted paper on them or cutouts in them. 4-5