Sharp AR-BC260 ARBC260 Operation Manual - Page 43
Misfeed in the stand/1 x 500 sheet paper drawer, out paper tray 1 and remove the misfed
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
MISFEED REMOVAL Misfeed in the stand/1 x 500 sheet paper drawer NOTE Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from happening, always open the right side cover first and remove the misfed paper if it is extending into that area. 1 Open the upper and lower side covers. Push the lever upward and gently open the cover. 3 If misfed paper is not found in step 2, pull out paper tray 1 and remove the misfed paper. 2 Be careful not to tear the misfed paper during removal. NOTE If paper is loaded in the bypass tray, temporarily remove the paper and close the bypass tray before opening the side cover. 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 4 Gently push the paper tray into the machine. Push the tray firmly all the way into the machine. 5 Gently close the upper and lower side covers. After closing, confirm that the misfeed message has been cleared and the normal display appears. NOTE The misfeed may have occurred inside the machine. Check carefully and remove it. Misfeed in the stand/3 x 500 sheet paper drawer To remove a misfeed in the upper, middle, or lower tray, follow steps 1 through 5 above of "Misfeed in the stand/1 x 500 sheet paper drawer". 2-21