Sharp AR-BC260 ARBC260 Operation Manual - Page 33
Setting the paper type (except the bypass tray), Setting the paper size when an extra size is loaded
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
LOADING PAPER Setting the paper type (except the bypass tray) Follow these steps to change the paper type setting when the paper type has been changed in a paper tray. For the paper types that can be used in each tray, see page 2-9. To change the paper type setting for the bypass tray, see page 2-12. 1 Press the [CUSTOM SETTINGS] key. The custom setting menu screen will appear. 2 Touch the [TRAY SETTINGS] key. TOT L COUNT TRAY SETTINGS CONTRA The paper tray selection screen will appear. ADDRES CONTRO KEYBOARD SELECT KEY 3 Select the paper tray for which the setting is to be made. (For the tray numbers, see the tray specifications on page 2-9.) TRAY 1 TYPE / SIZE PLAIN / If the desired tray is not on the display, use or key to scroll the TRAY 2 PLAIN / display until it appears. 4 Select the type of paper that was loaded in the tray. PLAIN PRE-PRINTED RECYCLED LETTER HEAD PRE-PUNCHED COLOR The currently selected paper type will be highlighted. To change the setting, touch the desired type. NOTE Special paper such as transparency film, envelopes, and postcards can only be used in the bypass tray. 5 Touch the [OK] key to complete the setting. Setting the paper size when an extra size is loaded When a paper tray is set to "extra", this informs the machine that an extra size is being used. It does not inform the specific size. To enter the specific size of the paper loaded, follow the steps below. For example, if A4 size paper is loaded in the tray (with the size slide set to "extra"), you can use this procedure to set the paper size recognized by the machine to A4 2 size. If you loaded an irregular size of paper, you can enter the dimensions of the paper. To set the paper size when an extra size of paper is loaded in the bypass tray, see page 2-12. 1 Perform steps 1 through 4 of "Setting the paper type" at left. 2 Touch the key to display the paper size setting screen. CUSTOM SETTINGS TRAY 3 TYPE/SIZE SETTING EXTRA SIZE A3 B4 B5R A5 11X17 51/2 X81/2 81/2 X14 71/4X101/2R A4 8K 81/2 X13 EXTRA A4R 16K 81/2 X11 B5 16KR 81/2X11R OK 2/3 3 When the loaded paper size appears in the display (if you loaded an AB-based size such as A4), touch the size key to highlight it, and then touch the [OK] key to complete the procedure. 4 If an irregular size of paper was loaded after the [EXTRA] key was touched, touch the key in the screen of step 2 to display the following screen. X 5 1/2 (5 1/2 17) inch Y 7 1/4 (7 1/4 11 3/4) inch When the screen opens the X key will be highlighted. Use the and touch keys to enter the X dimension. Next touch the Y key to highlight it and enter the dimensions for Y. The permitted range for the X dimension is 5-1/2 to 17 inches (139 to 432 mm), and the permitted range for the Y dimension is 7-1/4 to 11-3/4 inches (182 to 297 mm). When both have been entered, touch the [OK] to complete the operation. 2-11