Sharp AR-BC260 ARBC260 Operation Manual - Page 52

SADDLE STITCH FINISHER Saddle stitch finisher functions I Sort mode Sorted sets will be delivered. I Group mode Groups of copies of the same page will be delivered. I Offset mode Offset mode Non-offset mode Original Printouts Original Printouts Sets will move from side to side so that each set or group will be offset from the previous set or group for easy separation. (The offset function only operates in the offset tray.) Stapled sets will not be offset. I Staple sort mode Collated sets of prints or copies will be stapled and delivered to the offset tray. When saddle stitching is selected, the prints or copies will be stapled at the center and delivered to the saddle stitch tray. The stapling positions, orientation, paper size for stapling, and stapling capacity are shown below. Stapling positions Top left corner of printouts Portrait orientation Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: For each size, up to 30 sheets can be stapled Landscape orientation Available paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R, A3, B4 and A4R Stapling capacity: Up to 30 sheets of 8-1/2" x 11"R or A4R paper can be stapled, up to 25 sheets of other paper sizes Lower left corner of printouts Same as above Same as above Center left two positions of printouts Saddle stitch on centerfold line. Same as above Paper in the portrait direction cannot be saddle stitched. Same as above Available paper sizes: 11" x17", 8-1/2" x 11"R, A3, B4 and A4R Stapling capacity: For each size, up to 10 sheets can be stapled 3-4