Sharp AR-BC260 ARBC260 Operation Manual - Page 51
Supplies, Saddle Stitch Finisher, Notes
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
SADDLE STITCH FINISHER Allowed paper sizes for stapling Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, B5 Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R Staple Maximum number of sheets for stapling See "Staple sort mode" on the next page Stapling positions Upper tray: 3 locations (1 position back, 1 position front, 2 positions center) Lower tray: 4-47/64" (120 mm) pitch from center of paper Saddle stitch Maximum of 10 sheets can be stapled (21 lbs. or 80 g/m2) Paper size: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R Paper weight: 17 to 28 lbs. or 64 to 105 g/m2 Power supply Supplied from machine (Stand / paper drawer) Dimensions 24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H) (633 mm (W) x 603 mm (D) x 771 mm (H)) Weight Approximately 79.4 lbs. (36 kg) 3 Overall dimensions when attached to machine 1432 mm (W) x 676 mm (D) (56-25/64" (W) x 26-5/8" (D)) (when tray is extended) Remarks Paper output Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only Paper full detection Both upper and lower tray Offset function Upper tray only (offset function not possible for 12" x 18", 5-1/2" x 8-1/2"R, A3W and A5R size paper) Paper conveying Center reference Name Hole punching Allowed paper sizes for punching Power supply Dimensions Weight Punch module 3 or 2 holes 3 holes: 11" x 17", 8-1/2" x 11", A3, A4 2 holes: 8-1/2" x 14", 8-1/2" x 11"R Supplied from machine saddle stitch finisher 3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H) (95 mm (W) x 560 mm (D) x 170 mm (H)) Approximately 5.6 lbs. (2.5 kg) Specifications are subject to change for improvement without notice. NOTES G Transparency film, envelopes, postcards, and other special papers cannot be stapled. G If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled. Supplies AR-SC2 staple cartridges must be used for this finisher. The cartridge package contains three cartridges of approximately 5000 staples each. 3-3