Sharp AR-BC260 ARBC260 Operation Manual - Page 25
Set the paper type of the paper that was, Gently push tray 1 into the machine.
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
LOADING PAPER 4 Load paper into the tray. 6 Set the paper type of the paper that was loaded in the 1st tray. If you loaded a different type of paper from the previous paper, be sure to set the new paper type as explained in "Setting the paper type" (page 211). 7 Changing paper size in paper tray 1 is now complete. 5 Gently push tray 1 into the machine. 2 Push the tray firmly all the way into the machine. NOTE If the size slide position (step 2 of page 2-2) is not set correctly after changing the paper size, or if the paper type (page 2-11) is not set correctly, incorrect paper selection or paper misfeeding may occur. 2-3
LOADING PAPER
2-3
2
4
Load paper into the tray.
5
Gently push tray 1 into the machine.
Push the tray firmly all
the
way
into
the
machine.
6
Set the paper type of the paper that was
loaded in the 1st tray.
If you loaded a different type of paper from the
previous paper, be sure to set the new paper type
as explained in "Setting the paper type" (page 2-
11).
7
Changing paper size in paper tray 1 is now
complete.
NOTE
If the size slide position (step 2 of page 2-2) is not set correctly after changing the paper size, or if the paper type
(page 2-11) is not set correctly, incorrect paper selection or paper misfeeding may occur.