Sharp AR-BC260 ARBC260 Operation Manual - Page 55
Staple cartridge replacement and staple jam removal, Staple cartridge replacement
View all Sharp AR-BC260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
SADDLE STITCH FINISHER Staple cartridge replacement and staple jam removal When the staple cartridge becomes empty or staples become jammed, a message will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge or remove jammed staples. I Staple cartridge replacement 1 Open the front cover. 6 Insert a new staple cartridge into the staple box. After inserting the staple cartridge, press down on the staple box cover to lock the cartridge in place. 2 Pull out the stapler section. 3 3 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front. Roller rotating knob A Staple unit Turn the roller rotating knob until the triangle mark is aligned with the index. NOTES G Do not remove the tape from the cartridge before inserting the staple cartridge into the box. G Make sure that the new staple cartridge is locked securely in the staple box. Press down on the staple box cover until you hear a "click" indicating that the staple cartridge is locked. 7 Remove the tape from the staple cartridge by pulling it straight. 4 Remove the empty staple box. 8 Insert the staple box. Push the staple box in until it clicks into place. 5 Remove the empty staple cartridge. Press the lock button to unlock the staple box cover and remove the staple cartridge. NOTE If staples remain, the staple cartridge cannot be removed. 9 Push the stapler section back into the finisher. 10Close the front cover. NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly. 3-7