Canon PIXMA MP800R Setup Guide - Page 65
Get IP address automatically, Use next IP address, IP Address/Subnet Mask/Default Gateway, Network
View all Canon PIXMA MP800R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
ENGLISH Problem Possible Cause and Measures The [Set Printer IP Address / Printer IP Address Setup] dialog box is displayed during setup The following dialog box is displayed if no printer was detected on the network. Specify the IP address of the machine and click [Connect] to retry the detection of the target printer. (1) (2) (3) (4) (1) Get IP address automatically Select to use an IP address provided by a DHCP server. This requires that the DHCP function is enabled on the router or access point. (2) Use next IP address Select to manually specify an IP address, for example if there is no DHCP server functionality in the network environment in which you are using the machine. IP Address/Subnet Mask/Default Gateway Enter each value to specify a fixed IP address when [Use next IP Address] is selected. (3) Network Information Displays the [Network Information] dialog box. Click this button to confirm network settings when your access point or your machine cannot be detected automatically during setup for use over the network. This button is enabled when an access point was not detected or could not be connected. (4) Connect Searches for the machine with the specified settings. If the machine is still not be detected with a specified IP address, see "Cannot connect to the machine (the machine is not detected)" on page 60. Note Clicking [Back] displays the [Access Points] dialog box. 64 Troubleshooting