Canon PIXMA MP800R Setup Guide - Page 68
Retry
View all Canon PIXMA MP800R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ENGLISH Problem Possible Cause and Measures "You have connected the printer to an unsecured wireless network" is displayed during setup Security is not configured on the access point. The machine can still be used, so continue the setup procedure to complete it. Important If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. "Communication with the Card Slot failed" is displayed during setup This message is displayed if installation of the network drive for the Card Slot fails during setup. (1) (2) (1) Retry Click to retry the network setup of the Card Slot. (2) Skip Click to continue installation without the network setup of the Card Slot. When this message is displayed, wait for a while, then click [Retry]. If it fails again, follow the procedure below. z Make sure the computer is communicating with the network properly, then restart the computer. Then try again. z Disable the Windows Firewall function, or open port 137:139 to allow communication with the machine following the procedure below. For information on other security software, refer to its manual or manufacturer. Important If you disabled the firewall feature, disconnect your network from the Internet. You can do this by configuring your access point or router not to connect to the Internet or WAN. Troubleshooting 67