Canon PIXMA MP800R Setup Guide - Page 67

ENGLISH Problem The [Printer Network Setup] dialog box is displayed during setup Possible Cause and Measures The [Printer Network Setup] dialog box is displayed in the following cases. - when you are re-setting a machine whose setup was canceled halfway - when you changed the network settings - when you are already using a machine over a wireless or wired LAN If you canceled setup or changed the network settings, perform network setup again. When you intend to use the machine connected to the network with the current settings, do not change the network settings. Change printer settings The machine network settings will be changed to enable communication under the current network settings. Do not change printer settings Continues computer setup with the settings specified to the machine. Select this when you are not currently connected to a network but want to set up the computer with the settings specified to the machine. The [Enter Password / Password Input] dialog box is displayed during setup Note After setup, confirm that the machine and the computer (or the access point, when using wireless LAN) can communicate with each other. If not, perform network setup again. The following dialog box is displayed if an administrator password is set to the machine which has already been set up. Admin Password Enter the administrator password you have set. The administrator password consists of alphanumeric characters and is no longer than 32 characters. The password is case sensitive. For security, your entry will be displayed by "*" (asterisks) for Windows and "•" (bullets) for Macintosh. 66 Troubleshooting