Canon XF100 XF100 / XF105 Instruction Manual - Page 53
Image Stabilizer
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Image Stabilizer Image Stabilizer Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. There are 3 methods of image stabilization; select the method that best suits your needs. Dynamic IS P: Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle. [l Camera Setup] 53 [OIS Functions] [Img Stab.] Standard IS O: Standard IS compensates for a lower degree of camcorder shake, such as when shooting while remaining stationary, and is suitable for shooting natural-looking scenes. Powered IS Q: Powered IS is most effective when you are stationary and zooming in on far subjects using high zoom ratios (the more you approach the telephoto end). This mode is not suitable for tilting and panning shots. Dynamic IS and Standard IS are activated using the camera menu. Powered IS is activated using an assignable button. To activate Dynamic IS or Standard IS Operating modes: 1 Open the [OIS Functions] submenu. [l Camera Setup] [OIS Functions] 2 Select [Img Stab.] and then press SET. • Select [Off] to turn off image stabilization. 3 Open the [Image Stabilizer] submenu. [l Camera Setup] [Image Stabilizer] 4 Select [Dynamic] or [Standard] and then press SET. • The icon of the selected mode appears on the bottom of the screen. To activate Powered IS By default, assignable button 1 is set to [Powered IS]. Press the button to activate Powered IS. The Powered IS icon (Q) appears on the bottom of the screen. NOTES • If you set an assignable button to [Img Stab.] (0 97), you can press the button to turn the selected image stabilization method on or off. • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • When you are using [Dynamic] mode, the edges of the picture may be adversely affected (such as ghosting, artifacts and dark areas) when compensating for a high degree of camcorder shake. • When the camcorder is mounted on a tripod, turn off image stabilization. • You can activate Powered IS even when image stabilization is turned off.