Canon XF100 XF100 / XF105 Instruction Manual - Page 73
Setting the User Bit
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. b If user bit information is being received along with an external time code, you can also record the external user bit on the recording media. Operating modes: [L TC/UB Setup] 73 [User Bit] [Type] [Setting] 1 Open the user bit [Setting] submenu. [L TC/UB Setup] [User Bit] [Type] [Setting] • To set the time for the user bit select [Time] instead; to set the date for the user bit, select [Date]. In such case, the rest of the procedure is not necessary. 2 Select [Set] and then press SET. • The user bit setting screen appears with an orange selection frame on the leftmost digit. • To reset the user bit to [00 00 00 00], select [Reset] instead. 3 Select an alphanumeric character (hexadecimal) then move (A) to the next digit. 4 Change the rest of the digits in the same way. • Press the CANCEL button to close the screen without setting the user bit. 5 Select [Set] to close the screen.