Cisco 3825 Hardware Installation Guide - Page 270

Cisco Unity Express Network Module LEDs Chapter 23 Connecting Cisco Unity Express Network Modules Figure 23-1 NM-CUE Faceplate NM-CUE DISK NOT SUPPORTED LINK ACT PWR EN CF FastEthernet 0 88734 Cisco Unity Express Network Module LEDs All network modules have an enable (EN) LED. This LED indicates that the module has passed its self-tests and is available to the router. All Cisco Unity Express network modules display an additional power (PWR) LED and a CompactFlash (CF) LED on the faceplate, and two additional LEDs for the Fast Ethernet port. (See Figure 23-2 and Table 23-1.) Note The CF and Fast Ethernet port LEDs are not used by the Cisco Unity Express network module. Figure 23-2 NM-CUE LEDs DISK LINK ACT NM-CUE DISK NOT SUPPORTED LINK ACT PWR EN CF FastEthernet 0 PWR EN CF 88735 Table 23-1 Cisco Unity Express Network Module LEDs LED ACT CF DISK EN LINK PWR Meaning There is activity on the Fast Ethernet connection. Note This LED is not used on the NM-CUE. The compact Flash module is active. Note This LED is not used on the NM-CUE. There is activity on the 20-GB disk-expansion module hard drive. The module has passed self-test and is available to the router. The Fast Ethernet connection is available to the network module. Note This LED is not used on the NM-CUE. Power is available to the network module. 23-2 Cisco Network Modules Hardware Installation Guide OL-2485-20