D-Link DGS-3612G Product Manual - Page 117

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 3- 11. Double VLAN State Settings window (Enabled) Parameters shown in the previous window are explained below: Parameter Description Double VLAN State SPVID VLAN Name TPID Use the pull-down menu to enable or disable the Double VLAN function on this Switch. Enabling the Double VLAN will return all previous VLAN configurations to the factory default settings and remove Static VLAN configurations from the GUI. The VLAN ID number of this potential Service Provider VLAN. The name of the VLAN on the Switch. The tagged protocol ID of the corresponding VLAN that will be used in identification of this potential Double VLAN, written in hex form. The user may view configurations for a Double VLAN by clicking its corresponding read-only window. button, which will display the following Figure 3- 12. Double VLAN Information window Parameters shown in the previous window are explained below: Parameter Description SPVID VLAN Name TPID Uplink Ports The VLAN ID number of this potential Service Provider VLAN. The name of the VLAN on the Switch. The tagged protocol ID of the corresponding VLAN that will be used in identification of this potential Double VLAN, written in hex form. These ports are set as uplink ports on the Switch. Uplink ports are for connecting Switch VLANs to the Service Provider VLANs on a remote source. Only gigabit ports can be configured as uplink ports. 101