Home » D-Link Manuals » Hubs & Switches » D-Link DGS-3612G » Manual Viewer

D-Link DGS-3612G Product Manual - Page 53

Server IPv4, Address, Domain Name, Local File Name, Unit Number, Image File in Flash

UPC - 790069296390

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Server IPv4 Address Server IPv6 Address Domain Name Local File Name Unit Number Enter the IPv4 address of the server from which to upload or download firmware and configuration and upload log. Enter the IPv6 address of the server from which to upload or download firmware and configuration and upload log. Enter the domain name of the TFTP server. Enter the path and filename of the firmware or configuration file to upload or download, located on the TFTP server. Select the unit to configure, or tick the ALL check box to select all available units. Image File in Flash To select a firmware file from the internal Flash drive to be transferred, or to load a firmware file on to the Flash drive, enter the path and filename here and tick the corresponding check box. Remember, the only path that can be used on the flash is named C:\ (ex. C:\runtime.had) Configuration File in Flash To select a configuration file from the internal Flash drive to be transferred, or to load a configuration file on to the Flash drive, enter the path and filename here and tick the corresponding check box. Remember, the only path that can be used on the flash is named C:\ (ex. C:\configuration.had) Filter This is used to filter the configuration data that relates to upload configuration. Click Start to initiate the file transfer. 37

Section	Page
Web-based Switch Configuration	1
Administration	1
L2 Features	1
L3 Features	1
QoS	1
ACL	1
Security	1
Monitoring	1
Switch Maintenance	1
Technical Specifications	1
Cables and Connectors	1
System Log Entries	1
Module Specs and Cable Lengths	1
Password Recovery Procedure	1
RADIUS Attributes Assignment	1
Glossary	1

Match case Limit results 1 per page

xStack

DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch

Server IPv4

Address

Enter the IPv4 address of the server from which to upload or download firmware and

configuration and upload log.

Server IPv6

Address

Enter the IPv6 address of the server from which to upload or download firmware and

configuration and upload log.

Domain Name

Enter the domain name of the TFTP server.

Local File Name

Enter the path and filename of the firmware or configuration file to upload or download, located

on the TFTP server.

Unit Number

Select the unit to configure, or tick the ALL check box to select all available units.

Image File in Flash

To select a firmware file from the internal Flash drive to be transferred, or to load a firmware file

on to the Flash drive, enter the path and filename here and tick the corresponding check box.

Remember, the only path that can be used on the flash is named C:\ (ex. C:\runtime.had)

Configuration File

in Flash

To select a configuration file from the internal Flash drive to be transferred, or to load a

configuration file on to the Flash drive, enter the path and filename here and tick the

corresponding check box. Remember, the only path that can be used on the flash is named C:\

(ex. C:\configuration.had)

Filter

This is used to filter the configuration data that relates to upload configuration.

Click

Start

to initiate the file transfer.