D-Link DGS-3612G Product Manual - Page 418

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch SSH Authentication Mode and Algorithm Settings The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication encryption. There are four categories of algorithms listed and specific algorithms of each may be enabled or disabled by using their corresponding pull-down menus. All algorithms are enabled by default. To view this window, click Security > SSH > SSH Authentication Mode and Algorithm Settings, as shown. The following algorithms may be set: Parameter Description Figure 7- 68. SSH Authenticate Mode and Algorithm Settings window Password Public Key Host-based 3DES-CBC Blow-fish CBC AES128-CBC SSH Authentication Mode and Algorithm Settings This parameter may be enabled if the administrator wishes to use a locally configured password for authentication on the Switch. The default is Enabled. This parameter may be enabled if the administrator wishes to use a public key configuration set on a SSH server, for authentication on the Switch. The default is Enabled. This parameter may be enabled if the administrator wishes to use a host computer for authentication. This parameter is intended for Linux users requiring SSH authentication techniques and the host computer is running the Linux operating system with a SSH program previously installed. The default is Enabled. Encryption Algorithm Use the pull-down to enable or disable the Triple Data Encryption Standard encryption algorithm with Cipher Block Chaining. The default is Enabled. Use the pull-down to enable or disable the Blowfish encryption algorithm with Cipher Block Chaining. The default is Enabled. Use the pull-down to enable or disable the Advanced Encryption Standard AES128 402