D-Link DGS-3612G Product Manual - Page 161
Setup Static Multicast Forwarding Table, Static Multicast Forwarding Settings window
UPC - 790069296390
View all D-Link DGS-3612G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Multicast Forwarding The following window is used to set up multicast forwarding on the Switch. To view this window, click L2 Features > Forwarding & Filtering > Multicast Forwarding, as shown below: Figure 3- 62. Static Multicast Forwarding Settings window The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below: Figure 3- 63. Setup Static Multicast Forwarding Table window The following parameters can be set: Parameter Description Unit Select the unit to configure. VID The VLAN ID of the VLAN to which the corresponding MAC address belongs. Multicast MAC Address The MAC address of the static source of multicast packets. This must be a multicast MAC address. Port Settings Allows the selection of ports that will be members of the static multicast group and ports that are either forbidden from joining dynamically, or that can join the multicast group dynamically, using GMRP. The options are: None - No restrictions on the port dynamically joining the multicast group. When None is chosen, the port will not be a member of the Static Multicast Group. Egress - The port is a static member of the multicast group. Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding under the Delete heading. Click the Show All Multicast Forwarding Entries link to return to the Static Multicast Forwarding Settings window. 145