D-Link DGS-3612G Product Manual - Page 69

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 2- 52. DHCP Relay Option 60 Add window The following parameters may be configured: Parameter Description String Enter the specified string, up to a maximum of 255 alphanumeric characters. Server IP Enter the relay server IP address. Match Type Use the drop-down menu to select either Exact Match or Partial Match. Exact Match - The option 60 string in the packet must fully match the specified string. Partial Match - The option 60 string in the packet only needs to partially match the specified string. Click Apply to implement the changes. To return to the DHCP Relay Option 60 Table window, click the Show DHCP Relay Option 60 Table link. DHCP Relay Option 61 Default Settings This window is used to configure the DHCP Relay Option 61 Default Settings. These settings are used to determine the rule to process those packets that have no option 61 matching rules. To view this window, click Administration > DHCP/BOOTP Relay > DHCP Relay Option 61 Default Settings, as shown below: Figure 2- 53. DHCP Relay Option 61 Default Settings window The following parameters can be configured: Parameter Description DHCP Relay Option Use the pull-down menu to choose either Relay or Drop. When drop is specified, the packet 61 Default with no matching rules found will be dropped without further process. When relay is selected the packet will be relayed based on the relay rules. Enter the IP Address of the entry you wish to configure. Click Apply to implement the changes. 53