D-Link DGS-3612G Product Manual - Page 299

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch IP Address Enter the IP address of the neighbor to be configured. Peer Group Name Enter the peer group to be configured. Filter List Type Toggle between In and Out to apply to either inbound or outbound traffic. Filter List Action Toggle between Add and Delete. Filter List Name Enter the name of an AS path access list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. Prefix List Type Toggle between In and Out to apply to either inbound or outbound traffic. Prefix List Action Toggle between Add and Delete. Prefix List Name Enter the name of a prefix list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. Capability ORF Prefix List Type Use to configure an outbound route filter prefix list capability. It can be sent with the following values: Receive: Enable the ORF prefix list capability in the receiving direction. The local router will install the prefix filter list notified by the remote router. Send: Enable the ORF prefix list capability in the sending direction. The local router will notify the remote router for the ORF prefix list capability. Both: Enable the ORF prefix list capability in both received and send directions. None: Disable the ORF prefix list capability in both received and send directions Click Apply to implement changes made. BGP Reflector Settings This window is used to configure the BGP's neighbor of the route reflector client. To view this window, click L3 Features > BGP > BGP Reflector Settings, as shown below: Figure 4- 141. BGP Reflector Settings window 283