D-Link DGS-3612G Product Manual - Page 175
From/To, Missdrop, TPID0x1-0xffff, Use Inner Priority, Apply, Disabled, Enable
UPC - 790069296390
View all D-Link DGS-3612G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch dynamically registered VLAN entries will be cleared, GVRP will be disabled. According 802.1ad, the address 01-80-c2-00-00-08 will be used for STP in the provider's network. So the user shall disable STP first, and then use the new address for STP state machine. The default setting is Disabled. Unit Select the Switch to be configured. From/To A consecutive group of ports that are part of the VLAN configuration starting with the selected port. Role The user can choose between UNI or NNI role. UNI - To select a user-to-network interface which specifies that communication between the specified user and a specified network will occur. NNI - To select a network-to-network interface specifies that communication between two specified networks will occur. Missdrop Enable or Disable C-VLAN based on SP-VLAN assignment miss drop. When enabled the tagged packet will be dropped if the VLAN translation look up misses. When disabled the packet will not be dropped if the VLAN translation loop up misses. If VLAN translation table lookup misses, the packet can be either dropped or add an outer VLAN based on MAC/SUBNET/PROTOCOL/PORT based VLAN configuration. This will make the packet as a double tagged packet. Note: The result will be Transparent Mode behavior. TPID(0x1-0xffff) The Outer TPID is used for learning and switching packets. The Outer TPID constructs and inserts the outer tag into the packet based on the VLAN ID. Use Inner Priority Specify whether to use the priority in the C-VLAN tag as the priority in the S-VLAN tag. By default, the setting is Disabled. Click Apply to implement changes. 159