D-Link DGS-3612G Product Manual - Page 254

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch DHCP Server Manual Binding The following windows will allow users to view and set manual DHCP entries. Manual DHCP entries will bind an IP address with the MAC address of a client within a DHCP pool. These entries are necessary for special devices on the local network that will always require a static IP address that cannot be changed. To view this window, click L3 Features > DHCP Server > DHCP Server Manual Binding, as shown below: Figure 4- 81. DHCP Server Manual Binding Table window Users may view statically bound DHCP entries within a DHCP pool by entering the Pool Name and clicking Find. Results will be displayed in the window above. To remove an entry from the table, click its corresponding under the Delete heading. To set a manual DHCP Binding entry, click the Add window, which will produce the following window to configure. Figure 4- 82. Create DHCP Pool Manual Binding window The following parameters may be configured or viewed. Parameter Description Pool Name Enter the name of the DHCP pool within which will be created a manual DHCP binding entry. IP Address Enter the IP address to be statically bound to a device within the local network that will be specified by entering the Hardware Address in the following field. Hardware Address Enter the MAC address of the client to be statically bound to the IP address entered in the previous field. Type This field is used to specify the type of connection for which this manually bound entry will be set. Ethernet will denote that the manually bound device is connected directly to the Switch, while the IEEE802 denotes that the manually bound device is outside the local network of the Switch. Click Apply to set the entry. 238