D-Link DGS-3612G Product Manual - Page 346

xStack

®

DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch

header. Users must then specify what protocol(s) to include according to the following

guidelines:

Select ICMP to instruct the Switch to examine the Internet Control Message Protocol (ICMP)

specify that the access profile will apply an ICMP type value,

Select IGMP to instruct the Switch to examine the Internet Group Management Protocol

at the access profile will apply an IGMP type value.

Select

g

a TCP port mask for the source port in hex form (hex 0x0-

dst p

ask for the destination port in hex form (hex

Select UDP

ined in an incoming packet as the forwarding

ort mask - Specify a UDP port mask for the source port in hex form (hex 0x0-

dst p

k - Specify a UDP port mask for the destination port in hex form (hex

Protocol id - Enter a value defining the protocol ID in the packet header to mask. Specify the

field in each frame's header.

Select Type to further

or specify Code to further specify that the access profile will apply an ICMP

code value.

(IGMP) field in each frame's header.

Select Type to further specify th

TCP to use the TCP port number contained in an incoming packet as the forwardin

criterion. Selecting TCP requires that you specify a source port mask and/or a destination

port mask. The user may also identify which flag bits to filter. Flag bits are parts of a packet

that determine what to do with the packet. The user may filter packets by filtering certain flag

bits within the packets, by checking the boxes corresponding to the flag bits of the TCP field.

The user may choose between urg

(urgent), ack (acknowledgement), psh (push), rst

(reset),

syn

(synchronize), fin (finish).

src port mask - Specify

0xffff), which you wish to filter.

ort mask - Specify a TCP port m

0x0-0xffff) which you wish to filter.

to use the UDP port number conta

criterion. Selecting UDP requires that you specify a source port mask and/or a destination

port mask.

src p

0xffff).

ort mas

0x0-0xffff).

protocol ID mask in hex form (hex 0x0-0xff).

Click

Apply

to set this entry in the Switch’s memory.

330

Section	Page
Web-based Switch Configuration	1
Administration	1
L2 Features	1
L3 Features	1
QoS	1
ACL	1
Security	1
Monitoring	1
Switch Maintenance	1
Technical Specifications	1
Cables and Connectors	1
System Log Entries	1
Module Specs and Cable Lengths	1
Password Recovery Procedure	1
RADIUS Attributes Assignment	1
Glossary	1

D-Link DGS-3612G Product Manual - Page 346

Select ICMP to instruct the Switch to examine the Internet Control Message Protocol ICMP

Page 346 highlights